specifcations type fca acrylic flm chips are non-inductive stacked metallized film capacitors which feature large capacitance values in standard surface mount case sizes. acrylic stacked metallized film capacitors for filtering and noise attenuation highlights ? smallest flm chips ? no piezoelectric efect ? non-polarized, non-magnetic ? low esr ? 1.0 f/10v in 1206 case capacitance range: capacitance tolerance: rated voltage: ac voltage rating: operating temperature range: dissipation factor: dielectric strength: insulation resistance (ir): resistance to soldering : 0.10 f to 1.0 f 20% @ 1 khz and +20 oc 16 vdc [1.0 f in 1206 case, 10 vdc] 12 vrms C40 oc to +85 oc 0.015 @ 1 khz and +20 oc 175% of rated voltage for 5 seconds after 1 minute @10 vdc; +20 oc ir >1000 m? (c 0.33 f) ir > 300 m? ? f (c >0.33 f) the capacitor can withstand being heated in an oven at 235 oc for 200 seconds filtering ? decoupling ? noise attenuation ? distortion free audio type fca acrylic film capacitors offer high capacitance values in standard surface mount case sizes. they excel in attenuating dc power bus noise, and as ripple flters in dc to dc power conversion circuits. as coupling capacitors in audio circuits, they yield distortion free sound and better high frequency fltering. the 1.0 f 10 vdc rating ofers a flm capacitor that is a direct replacement for tantalum a case capacitors. the nonpolar fca capacitor has lower esr and lower dcl than an equivalent tantalum capacitor, and in high frequency applications it takes a tantalum capacitor with ten times the capacitance to perform as well as the fca capacitor. the capacitor is constructed of noninductive stacked layers of metallized acrylic resin flm with lead free solder (sn/ag/cu) plated copper alloy terminals. complies with the eu directive 2002/95/ec requirement restricting the use of lead (pb), mercury (hg), cadmium (cd), hexavalent chromium (cr(vi)), polybrominated biphenyls (pbb) and polybrominated diphenyl ethers (pbde). cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com type fca acrylic surface mount film capacitors
ratings specifcations moisture resistance: after 500 hours with rated voltage applied at +40 oc and 90 to 95% rh, the capacitor will meet the following limits: ? c = +20/C3% of the initial measured value df 2.25% (at 1 khz) ir > 100m? (c 0.33 f) ir > 30m? ? f(c > 0.33 f) dielectric strength: capacitor will withstand 130% of the rated voltage for 1 minute. life test: apply 125% of the rated dc working voltage at 85 oc for 1000 hours, and then stabilize them to +20 oc. capacitors will meet the following limits: c = +7%/C20% of the initial measured value df 1.65% (at 1 khz) ir > 300m? (c 0.33 f) ir > 100m? ? f(c > 0.33 f) outline drawing outline dimen - part number case inches millmeters suffx code l w h s l w h s (.008in.) (.008in.) (.008in.) (.012in.) (0.2mm) (0.2mm) (0.2mm) (0.3mm) j2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45 h1 1206 0.126 0.063 0.032 0.026 3.2 1.60 0.8 0.65 h2 1206 0.126 0.063 0.039 0.026 3.2 1.60 1.0 0.65 h3 1206 0.126 0.063 0.055 0.026 3.2 1.60 1.4 0.65 g2 1210 0.126 0.098 0.055 0.026 3.2 2.50 1.4 0.65 catalog part maximum current capacitance number dv/dt 10khz 20khz 50khz 100khz 200khz 500khz 1mhz (f) (v/s) (arms) (arms) (arms) (arms) (arms) (arms) (arms) 10 vdc 1.00 fca1206a105m-h3 3 0.60 0.76 1.05 1.220 1.35 1.43 1.43 16 vdc .10 fca0805c104m-j2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65 .15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.450 0.54 0.62 0.68 .22 fca1206c224m-h1 13 0.25 0.33 0.45 0.550 0.66 0.76 0.84 .33 fca1206c334m-h2 10 0.35 0.45 0.61 0.740 0.84 0.94 1.00 .47 fca1206c474m-h3 7 0.39 0.52 0.71 0.860 1.00 1.10 1.17 .68 fca1206c684m-h3 5 0.48 0.625 0.85 1.040 1.19 1.31 1.34 1.00 fca1210c105m-g2 3 0.60 0.78 1.05 1.250 1.38 1.46 1.46 cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com type fca acrylic surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com
temperature characteristics frequency characteristics cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com type fca acrylic surface mount film capacitors
typical applications coupling capacitor for audio: cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com type fca acrylic surface mount film capacitors cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com
typical applications filtering performance: notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information contained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8564 ? fax: (508)996-3830 ? www.cde.com type fca acrylic surface mount film capacitors
|
